1/2 WRAS Stainless ball valve motor Failsafe Close 3MTR Cable

Motor Actuator:
Open/Close: 4 to 6 seconds.
Includes: visual position indication.
Temperature (ambient): -15°C to +50°C.
Cycle life: 100,000+ open/close, 100% rated.
Power Consumption: 1 to 5 watts when moving.
Control options: Failsafe Close, Power Open
Power supply: 9-24v 2 amp, 110-240v 500mA recommended.
Voltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.

Ball Valve:
Bore: 15.0mm
Pressure: 0 to 10 Bar
Body: 304 stainless steel
WRAS Certificate 2012107
Port 1/2 BSP, optional NPT thread
Seals: PTFE + EPDM (WRAS Approved).
Temperature (media): -15°C to +100°C.
Media: air or water suitable with 304 stainless steel, EPDM + PTFE.

Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power

Control voltage 9 to 24v AC/DC or 110 to 240vAC.

Options to choose.

ABVM Weather Cover (recommended for use outdoors or wet environments).

E2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.
Volt free feed back (no voltage supplied from actuator).
Switch rating 0 to 36vDC 0.4 Amp Max. 

1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (SCABVM04S/9AR + SCABVM04S/2AR)

2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (SCABVM04S/9AR-NO + SCABVM04S/2AR-NO)

Failsafe actuators require minimum 30 second power ON for recharging.

3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.
Power to GREEN valve opens or power off valve closes. (SCABVM04S/2 and SCABVM04S/9)

Technical Specifications

Speed:
9-24 volt: Open 4 second / close 4 seconds
110-240 volt: Open 4 seconds / Close 6 seconds.

Start Power
9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.

Moving Power:
9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.)
110-240 volt: 2 to 5 Watts, 50 to 100mA.

As of 31st May 2023 the valve has opened and closed, 1,311,280 times and still opening and closing perfectly.

For manual override options please see in the relating products. (manual override is only available in 9-24vAC/DC) 

I do not recommend using these ball valves outside but if you do need to then we offer weather protection covers as shown in picture 3 (please see relating items)