1/2 WRAS Brass water solenoid valve 0-10 Bar 2/2 N/Closed

1/2 inch WRAS approved Brass water solenoid valve

Function: 2/2 way normally closed with anti water hammer design (slowed close)
Port: 3/8 BSPP thread
Pressure: 0 to 7 Bar (AC) or 0 to 6 Bar (DC Voltage) with 15 Watt Coil.
Pressure: 0 to 10 Bar with 18.5 Watt Coil.
Pressure: 0 to 3 Bar with ATEX EExmIIT4
Operation: Assisted Lift (Zero Rated)
Temperature: -5°C to +90°C Max
Body: Brass
Internals: stainless steel
Seals: EPDM WRAS approved for water.
WRAS Certificate Number 2306329.
Media: Water
Orifice: 13mm
Kv flow factor: 59L/Min based on water with a 1 bar pressure difference.
Coil: 15 Watt system 13/30 Nass Magnet Class H IP65 CE DIN43650A 100% duty rated.
Protection: IP65 with electrical connector (Included).

Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.

Voltages: 12vDC, 24vDC, 24vAC, 110vAC, 230vAC

WRAS Certificate Number 2306329.
Tested and approved 200,000 open and close cycles at 7 Bar with water, then a final 10.5 Bar pressure leak and function test.